Experimental single screw extruder table instrument type
This machine is suitable for polymer processing molding, especially for a small amount of samples for scientific research and development, to simulate the plastic processing of various aspects of continuous and discontinuous process, especially suitable for the teaching and research and development.
Model NO.
BP-8176-AT
Keyword：
Category：
Product manual：
Product Detail
Parameters
| Screw diameter | 16, 20 (optional) |
| Rotation speed | 0-285 rpm frequency control |
| Length ratio | 1：28, other length ratios(10 to 30 times) are optional. |
| Power supply | 3∮, AC380V, 50Hz |
| Dimension | 850×450×650 (W×D×H)mm |
| Weight | About125kg |
Features
1.Screw material：It is made of 38CrMoAl chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.
2.Barrel material：It is made of 45# carbon structural steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.
3.Heated zone：4 Mica heaters in the area of charging barrel, 1 heater in the handpiece area. Each area has a copper cooling fin covered with security wind shield.
4.Cooling device：Three groups of multi-wing blowing fans force cooling, quietly and strongly.
5.Driving motor：Precision gear reduction motor
6.Electronic control system：PID/LED/RKC intelligent digital display temperature controller, high precision digital instrument shows all of the extrusion parameters, including temperature control, driving, pressure, interlocking spreading function.
Related Products
Product message
Dongguan Baopin Precision Instruments Co., Ltd.
Add：No.29 Houjie Section,Gangkou Avenue,houjie town,
Dongguan City, Guangdong Province,China.
Tel: +86-0769-85752595/85759987/85759676
MP：+86-18938231256
E-mail：bp@dgbaopin.com
FeedBack
Copyright © 2022 Dongguan Baopin Precision Instruments Co., Ltd.