Single screw extruder PLC program controlled

This machine can be applied to the mixing, plasticizing and extrusion of engineering plastics, modified plastics, masterbatch and other high polymers with the features of uniformly dispersed, plastics coloring and filling to modify. It can be used in laboratory tests, quality control, teaching research and small-scale production,can extrude and make granula, sheet, pipe, etc. directly.Can simulate a variety of production process.

Model NO.

BP-8176-B

Keyword：

Laboratory single screw extruder

Category：

Lab Single Screw Extruder

Product manual：

Enterprise Product Brochure.pdf

Tel：

+86-18938231256

Message

Contact

Product Detail

Parameters

Screw diameter	16, 20, 25, 30 ( optional )
Rotation speed	0-285 rpm frequency control
Length ratio	1:28, other length ratios ( 10 to 30 times ) are optional
Power supply	3∮, AC380V, 50Hz
Dimension	1250×500×940 (W×D×H)mm
Weight	About175kg

Feeatures

■The screw diameter is optional:16, 20, 25, 30 and the length ratio: 10~30 times can be optional, expanding the scope of processing.
■Screw material: 38CrMoAl chromo alloy, surface through quenching and tempering , nitriding, chrome plating, polishing and super fine grinding process, roughness Ra≤0.4μm, nitriding layer depth ≥0.6mm, hardness HRC55 ~ 60
■Cylinder material: 45# carbon structural steel, surface by quenching and tempering, nitriding, chrome plating, polishing and super fine grinding process, roughness Ra≤0.4μm, nitriding layer depth ≥0.6mm, hardness HRC55 ~ 60
■The screw equipped with feeding section, transportation section, compression zone and mixing head can process all sorts of materials, achieving the best dispersion effect.
■It is 0-95rpm stepless frequency control to meet extrusion process requirements of different materials.
■Electric lap heater is used to heat charging barrel, easy to maintain and install. The independent heating of five areas can ensure the temperature meet the requirements. The barrel adopts 4 groups of multi-wing ultra-quiet fans to cool forcedly.
■The die head adopts quick connecting loop, fast to remove head and easy to connect with downstream equipments, time-saving and energy-saving during test conversion.
■Flow distribution plate and filter mask can be installed to prevent non-molten particles and impurities, in order to improve the melt pressure to ensure plasticizing quality.
■PLC programmable color touch screen, man-machine interface operation system, extrusion process dynamically can be displayed dynamically and monitored.