Cast film machine single screw PLC program control type

Suitable for extrusion of all kinds of general plastics such as PE, PP, PS, PC, pet, ABS, PVC, etc. This machine is equipped with the horizontal and vertical extruding casting cold roll can simulate single stretch film and sheet extrusion production process, etc. Can be used for thin film preparation and also can be used for thicker sheet.This machine is the best laboratory equipment of extruding forming film machine.

Model NO.

BP-8187-B

Keyword：

Lab Cast Film Extruder

Category：

Lab Cast Film Extrusion Line

Product manual：

Enterprise Product Brochure.pdf

Tel：

+86-18938231256

Message

Contact

Product Detail

Parameters

Single Screw extruder

Screw diameter	Φ 20 mm(or customize)
Length diameter ratio	1 : 28(optional)
Screw rotation speed	0 - 95rpm frequency control
Melt pump	10 cc/evr
Power supply	3 ∮ , five lines
Output	About3～6kg/h

Cast cold roll unit and winding system

Die	T hanger type
Die-lip width	300mm(or designated)
film width	260mm(or designated)
Traction speed	0-15rpm adjustable
Volume	1300x500x1470 (W×D×H) mm
Weight	About 385kg
Power supply	3 §,AC380V,50Hz

Specification

1、Screw material：It is made of 38CrMoAl chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.

2、Barrel material：45# carbon structural steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.

3、Heating zone：Heater in 3-zone of barrel, heater in 2-zone of head, covered with safety hood.

4、Cooling zone：3 group multi-wing fans cooling

5、Electronic control system：PLC programmable 15-inch color LCD touch screen, man-machine interface operation system, extrusion process can be displayed and monitored dynamically, including interlocking control functions such as heating temperature control in each area, screw speed, melt pressure and switch stop.

Cast film die

1、Die shape：T hanger type

2、Die material：CrNiMoA alloy steel

3、Die hardness：HRC65

4、Adjust method of die lip：Upper lip manual-push flexible fine-tuning, lower die lip is overall structure

Casting unit

1、Roller material：38CrMoAl chromium-molybdenum alloy steel , HRC60 mirror chromium plating.

2、Roller speed：0~15rpm frequency control

Loop unit

1、Conveying roller：Multi-row film conveying roller combination

2、Winding roller：Rubber and steel roller pneumatic clamping combination

3、Winding speed：0～15rpm frequency control

Electric control unit

1、Electronic control system：high-performance PLC programmable 15-inch color LCD touch screen, multi-screen display of man-machine interface, control all process parameters, such as temperature, traction, loop, number of revolutions, drive, pneumatic, brake and other interlocking joint control functions.