Welcome to Dongguan Baopin Precision Instruments Co., Ltd !

Dongguan Baopin Precision Instrument Co., Ltd.

Lab internal mixer PLC control

This machine is mainly used for the mixing of mixed rubber, plastics and industrial chemicals, and also used for the mixing of all kinds of low viscosity materials. It is equipped with PLC programmable LCD with human-machine interface operating system.Temperature, time and torque can display instantly. The mixing process will be completed automatically, simple and applicable with energy efficiency.

Model NO.

BP-8172-B 0.2-0.5L

Keyword：

Internal Mixer Closed Mixer Laboratory Mixer

Category：

Lab Internal Mixer

Product manual：

Enterprise Product Brochure.pdf

Tel：

+86-18938231256

Message

Contact

Product Detail

Parameters

Mixing chamber volume	0.2~0.5L ( optional )
Rotor speed ratio	3 : 2
Temperature range	RT ~ 300 ºC
Air source pressure	0.5 ~ 0.8 Mpa
Main motor	2.2 KW/3.7KW
Temperature accuracy	±1℃
Torque range	0-200N·m
Torque accuracy	0.5%F·S
Dimension(WDH)	0.2L/700×550×1700 mm 0.5L/850×570×1700 mm
Power supply	3∮, AC380V, 12A
Pressure	5Kg

Specification

1. Refuel method: Feeding directly
2. Rotor speed: 0-120 rpm
3. Rotor type: Roller / Banbury ( optional )
4. Heating method: Electro-thermal tube
5. Controller: PLC programmable color touch screen has human-machine interface. All the operating parameter can be set and controlled at will. Mould pressuring process and vulcanization curve can be displayed dynamically.

Features

■Three sides of the mixing chamber are independent with mezzanine heating or connecting water-cooling tubes, meeting the process requirements of any milling and refined plastics.
■The surfaces of the mixing chamber contacted with the material are adopting high corrosion resistance and high wear-resistant material. With the processing of high frequency, carburization, hardening and tempering, chrome plating and polishing, it becomes hard and durable, hard to wear.
■Strong pneumatic arc pressure mound is matched with the end of mixing chamber. This chamber is of good sealing property, without glue leakage and the mixing can be close to the real working environment.
■The speed motor drive of high pulling torque has an oval mixer shaft with two wings convex edges of lead angle. The angles are dislocated with opposite strength rotating and shearing, excellent mixing effect and efficient performance, significantly shortening the plasticate cycle.
■The human-machine interface operating system of PLC programmable LCD can set and instantly display all the process parameters. The mixing time, mixing temperature, rotor speed and load torque can also be set at will or display instantly, realizing the on-line measurement of mixing performance.