Welcome to Dongguan Baopin Precision Instruments Co., Ltd !

Dongguan Baopin Precision Instrument Co., Ltd.

Open Close Type Lab Internal Mixer PLC Control

This machine is mainly used for mixing the rubber, plastics, and chemical raw materials, and is also suitable for mixing various low viscosity materials. It is equipped with a PLC programmable LCD display, human-machine interface operation, real-time display of temperature, time, and speed, automatic completion of mixing process, simple and practical, energy-saving and efficient.

Model NO.

BP-8172-B 1L

Keyword：

Internal Mixer Closed Mixer Laboratory Mixer

Category：

Lab Internal Mixer

Product manual：

Enterprise Product Brochure.pdf

Tel：

+86-18938231256

Message

Contact

Product Detail

Parameters

Mixing chamber volume	1L
Temperature range	RT ~ 300 ºC
Heating method	Electric heating, 3 heating zones
Heating power	12kW
Rotor speed ratio	3:2
Rotor speed	0-95 rpm frequency control
Rotor material	SKD chromium molybdenum alloy
Rotor hardness	HRC60
Mixing chamber	Front, middle, and rear three plates type, made of SKD chromium molybdenum alloy material, inner cavity surface hardness HRC60, mirror hard chrome
Main motor	5.5kW
Power supply	3∮, AC380V,35A, three phase and five-line power supply( Customer-supplied power connection port)
Dimension	750×1220×2100 (W×D×H)mm
Weight	385Kg

Specification

1. Refuel method: Pneumatic opening and feeding
2. Rotor speed: 0-95 rpm
3. Rotor type: Roller
4. Heating method: Electric heating, 3 heating zones
5. Controller: PLC programmable color touch screen, man-machine interface system, all parameters can be set and controlled at will, dynamic display of temperature, time, speed and other parameter curves.

Feature

The rotor type of the mixer can be selected from the shearing type and the toothing type, which is suitable for the mixing and dispersion of various rubber materials.
Three sides of the mixing chamber are independent with mezzanine heating or connecting water-cooling tubes, meeting the process requirements of any milling and refined plastics
The surfaces of the mixing chamber contacted with the material are adopting high corrosion resistance and high wear-resistant material. With the processing of high frequency, carburization, hardening and tempering, chrome plating and polishing, it becomes hard and durable, hard to wear .
Strong pneumatic arc pressure mound is matched with the end of mixing chamber. This chamber is of good sealing property, without glue leakage and the mixing can be close to the real working environment
The specially designed patented technology of the mixing shaft and the two ends of the mixing chamber can ensure that the mixed rubber material will not leak for a long time and the sealing performance of the chamber is good.
The speed motor drive of high pulling torque has an oval mixer shaft with two wings convex edges of lead angle. The angles are dislocated with opposite strength rotating and shearing, excellent mixing effect and efficient performance, significantly shortening the plasticate cycle.
The human-machine interface operating system of PLC programmable LCD can set and instantly display all the process parameters. The mixing time, mixing temperature, rotor speed and load torque can also be set at will or display instantly, realizing the on-line measurement of mixing performance. Equipped with USB data output interface to connect with a computer for remote monitoring and printing results, enabling online measurement.