Daily maintenance of tablet press
Time of issue：
2023-05-08
(1) First of all, keep the equipment clean and check the moving parts to ensure the cleanliness of the equipment. There should be no decarburization and scratches on the moving parts, and the moving parts should be flexible.
(1) First of all, keep the equipment clean and check the moving parts to ensure the cleanliness of the equipment. There should be no decarburization and scratches on the moving parts, and the moving parts should be flexible.
(2) Always check the lubrication of each transmission part, add enough lubricating oil according to the regulations, and add lubricating grease once every shift.
(3) If abnormal conditions are found during the operation of the equipment, stop the machine immediately to check the cause and start the machine again after troubleshooting.
(4) The machine should be run without load for about 5 minutes every time the tablet is pressed, so that
(5) Always check the operation of the machine and whether the fasteners are loose.
(6) After each use, remove the powder and dirt in the machine in time, check the wear of each part of the machine and adjust the clearance of each part of the machine.
(8) Pay attention to check whether the electrical system and electrical components are abnormal.
(9) Regular inspection, refueling, maintenance and adjustment are very important, which are directly related to the service life and safety of the equipment.
(10) Pay attention to keep the surroundings of the machine clean and tidy and orderly, so as to provide good conditions for the work.
(11) A comprehensive inspection and adjustment should be carried out on newly installed or long-term out-of-service equipment.
(12) Regularly conduct tests on equipment technical performance and process parameters.
(13) The machine should be stored in a dry, ventilated room free of dust and corrosive gases, and kept in a good grounding state.
Recommend News
Dongguan Baopin Precision Instruments Co., Ltd.
Add：No.29 Houjie Section,Gangkou Avenue,houjie town,
Dongguan City, Guangdong Province,China.
Tel: +86-0769-85752595/85759987/85759676
MP：+86-18938231256
E-mail：bp@dgbaopin.com
FeedBack
Copyright © 2022 Dongguan Baopin Precision Instruments Co., Ltd.