Welcome to Dongguan Baopin Precision Instruments Co., Ltd !

Dongguan Baopin Precision Instrument Co., Ltd.

What should be paid attention to when using the internal mixer

Time of issue：

2023-05-19

Process flow of internal mixer: Physically pulverize the rubber compound, then put the pulverized rubber compound into the pre-mixing chamber of the internal mixer, squeeze it through the rollers of the internal mixer for mixing, and then perform secondary physical crushing , add the secondary pulverized compound rubber into the internal mixer for re-mixing, and physically pulverize the secondary-mixed material again. Physically pulverize the material again, and then carry out the second physical pulverization with an internal mixer, and finally complete the formation of rubber particles.

1.Before refining, it is necessary to check whether the connecting parts are in good condition and whether the fasteners are complete, and all bolts must be tightened.

2.Before starting refining, it is necessary to check whether the main motor and auxiliary machines (including power supply and cooling water) are in normal operation.

3.When refining, you must pay attention to the operation safety and do not overload.

4.After refining, the inspection door on the internal mixer cannot be opened.

Recommend News

my country's tablet press technology is constantly reforming and upgrading, moving towards high-speed and high-yield direction

2023-06-25

The importance and characteristics of internal mixer

2023-06-12

The operation process of the mill

2023-05-26

What should be paid attention to when using the internal mixer

2023-05-19

< 1 2 3 4...8 >